Free Deliveryon orders above ₹500
60 Mins
Pay on DeliveryFevicol Grippo WG, Synthetic Resin Adhesive, 50 Kg
- Brand: Fevicol (Pidilite)
- Product: Fevicol Grippo WG Synthetic Resin Adhesive
- Type: Water-based, solvent-free synthetic resin adhesive (industrial grade)
- Pack Size: 50 kg industrial drum
- Viscosity: 300 – 450 poise at 30°C
- Colour: Off-white emulsion, dries clear/white
- Full Cure: 24 hours before machining or loads
- Packaging: 01 Nos (Single Drum)
- Application: Cold press laminate pasting, furniture & cabinet production, wood-to-wood bonding, paper & packaging
Fevicol Grippo WG is an industrial-grade, water-based synthetic resin adhesive for furniture factories, cold press lamination lines and large fitout projects. Supplied in a 50 kg drum, it is ready to use and solvent-free.
Its controlled viscosity of 300 – 450 poise feeds smoothly through machine rollers and spreaders for an even glue line, and its long open time stops the glue skinning over while large panels are aligned and moved into the press. It forms a strong, flexible bond that resists shrinking and cracking, and handles kitchen and bathroom humidity. Allow 24 hours for a full cure before machining.
Key Features
- Built for Cold Press: A go-to adhesive for pasting laminates to plywood in cold press machines
- Long Open Time: Stays workable while large sheets are aligned and loaded into the press
- Machine-Friendly Viscosity: 300 – 450 poise for even spreading through rollers and automated spreaders
- Flexible, Anti-Shrink Bond: Resists cracking through heat and humidity changes
- Quality Compliance: ISO 9001, ISO 14001 and OHSAS 18001 – useful for export and audit-driven projects
Product Specifications Table
Technical Specifications (Quick Reference)
| Specification Parameter | Technical Detail |
|---|---|
| Brand | Fevicol (Pidilite) |
| Product | Fevicol Grippo WG Synthetic Resin Adhesive |
| Article Code | GRIPPO_WG_50 |
| Type | Water-based, solvent-free synthetic resin adhesive (industrial grade) |
| Pack Size | 50 kg industrial drum |
| Viscosity | 300 – 450 poise at 30°C (Brookfield RVT, 20 RPM) |
| Colour | Off-white emulsion, dries clear/white |
| Full Cure | 24 hours before machining or loads |
| Shelf Life | 12 months from manufacture (sealed, stored below 30°C) |
| Packaging | 01 Nos (Single Drum) |
| Application | Cold press laminate pasting, furniture & cabinet production, wood-to-wood bonding, paper & packaging |
| Not Suitable For | Gap filling, permanent water immersion, strong acids, high-temperature gasketing, PE / PP / PTFE (Teflon) plastics |
Recommendations & Ideal Use-Cases
Where this fits best
- Cold Press Lamination: Pasting wide laminates onto plywood and particle board
- Furniture & Cabinet Factories: Modular furniture, kitchen and wardrobe carcasses, board-to-board lamination
- Large Fitout Projects: Wall panelling and surface lamination where a steady bulk supply is needed
- Paper & Packaging: Paper bag bottom pasting, shipper boxes and book casing
Application Guidelines
- Surface Prep: Surfaces must be clean, dry and free of oil, grease, dust and old adhesive
- Apply: Spread a thin, uniform layer on one or both surfaces by brush, roller or spreader, with no pooling or gaps
- Join While Wet: Align and join before the adhesive film dries
- Press: Apply uniform pressure with clamps, press weights or a cold press
- Cure Before Machining: Allow at least 24 hours before trimming, edge-banding, sanding or loading
1) How is Grippo WG different from Fevicol SH?
Fevicol SH is made for carpenters applying glue by hand. Grippo WG is an industrial adhesive with viscosity tuned for machine rollers and cold presses, plus a long open time for large panels. It comes in a 50 kg drum for continuous production.
2) Can it be used in automated glue spreaders?
Yes. Its 300 – 450 poise viscosity at 30°C suits most standard cold press and panel lamination spreaders. Confirm with your machine manufacturer's specifications before first use.
3) What surfaces does it bond?
Wood, plywood, MDF, particle board, laminates, paper and cardboard for interior use. It does not bond PE, PP or Teflon (PTFE), cannot fill gaps, and is not for permanent water immersion, strong acids or high-temperature gasketing.
4) When can bonded panels be machined?
Assemblies can be moved from the press fairly quickly, but wait at least 24 hours for full strength before trimming, edge-banding, sanding or loading. Warm, dry conditions speed up curing; cool, humid conditions slow it.
5) How should the drum be stored, and what is the shelf life?
Store sealed drums in a cool, dry place below 30°C, away from sunlight, and protect from freezing. Shelf life is 12 months from manufacture. Reseal tightly after each use.
Why Buy from HomeRun?
- Authentic Fevicol Product: Verified genuine product sourced from authorized Pidilite channels
- 60-Minute Bangalore Delivery: Express delivery to active service zones – ideal when your production line needs a quick refill
- Bulk Supply: 50 kg industrial drums for volume production and large fitouts
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once opened or used
- Refer to Refund Policy for complete details